Good Morning Folks
Yes, I am still in my Mini Book making mood.
I think they make great gifts, and I love having them on hand.
So here is my newest creation...
Kits of this book that are ready for sale at Wholly Scrap!
Everything you need to make this book (and some extra goodies) are all kitted up ready for you to make your own.
The book itself needed the Bind-It-All to put it together so I decided to make the book for you...yes the book comes all completed in the kit!
All you have to do is make the tags and decorate the pages!!!
So here are the directions for putting the pages together...
once again here is the front...
You will notice that your pre-made book has the front chip board piece painted on the edges only. This is so you can glue your patterned paper in the center and have the black paint on the edge. I did this because I am tired of having my pages peel away from the edge of my books.
So from the black lined paper cut a 7x4 piece and glue it to the front chip board piece. The Sweet sticker can now be applied. I ran the ribbon all around the page and knotted it in the front. I added a layered flower with a brad on the center. The brad can go all the way through the Chip board to get adhered or if you prefer brad it then glue it down. Add you heart sticker..done
(You can click on any photo to enlarge it)
The front inside page gets the same paper treatment. A 7x4 black lined paper glued down, you will have to slide it under the ribbon. Add a sticker and a layered flower. You have a pile of fabric flowers in your kit. You can layer them as shown or make up your own combos. They all got a black brad (included in the kit) in the center to hold them together.
The first page of the book and all the pages that follow are made up of slots for tags.
Here is the first page with the tags taken out.
First you have to add your patterned paper to the white undecorated page. These pages were made with regular size 10 envelopes so you will see each pocket section defined clearly. Cut a 3 1/4 x 4 piece of black swirl paper and adhere it to the base pocket of the page. The cut a 2 3/4 x 4 piece from the flocked pink damask paper and glue that down to the second pocket square. Here is a little trick: When gluing these squares down slide the cut piece you are gluing down into the pocket a bit so that the pocket itself stays nice and secure. The measurements I am giving you allow for you to do this easily.
The third piece of patterned paper: the black lined gets cut 4x2 1/2 and glued down. Your tags for this page are the black hounds tooth tag, this gets punched out of the tag sheet, the pink antique tag, cut this one of the three out of the sheet provided and the back tag gets cut from the black card stock it measures 3 1/2 x 5 1/2. The side pocket tag 4 1/2 x 3 3/4 this gets cut from the pink dot paper. I rounded the corners with my punch. Add your flowers, ribbons and stickers. For the top black tag I added a ribbon pull by cutting and folding the pink and white ribbon. I stapled these on and covered the staples with the mini sparkle flowers.
The next two pages...
Here is the page with the tags all out.
Lets work on the left side first. Cut a 4 x 6 1/4 piece of pink flocked damask paper and adhere (remember to slide it into the pocket a bit while adhering it down). Cut a piece of black swirl patterned paper 4 x 1 1/4 and adhere it to the front of the pocket. The right side of the page is exactly like the previous page, follow those directions.
Onto the tags...
The left side tags....Punch the large lined pink folder from you kit out. I cut this piece into three tags. I kept the tab sticking out to the right so that the lines are going from left to right (as if you were going to write on them). So this folder measures 11 x 7 keep the 11 inch length going from left to right and cut it into three sections so that you get three tags 4 x 7...4 x 7 and the last tag will be 3 x 7 with the tab sticking out to the right. I rounded the corners with a punch.
Use one of the lined tags for this big pocket. The smaller tag gets cut from the black swirl paper (you will find a manila tag in your kit as a sample size...trace it and cut it out). The right side of the book tags are similar to the first page cut a pink antique tag out from your kit, punch the pink tag out from your kit, cut a black tag out from the black card stock 3 1/2 x 5 1/2 and cut a pink tag out from the pink dot paper 4 1/2 x 3 3/4 and round the edges if desired. Add your flowers, stickers and ribbon as shown.
Here are the next two pages.
You know the routine by now...add the patterned paper, tags and embellies exactly as you did before.
Here are the tags pulled out
Here are the last two pages
Here are the tags pulled out
You can see it is much of the same. Follow the previous directions.
The back page you will notice is painted on the edges, just like the front cover it up with the black lined patterned paper. The back of the book has been painted in black and does not need anything added.
You will notice that you can see my staples and brads from the reverse side of my pages, I plan to cover them up with my mini sparkle flowers. I left them exposed for you to see how it all went together. You will have extra mini flowers in your kit to do that.
I hope you enjoyed this kit!!
If you have any questions please e-mail me and I will do my best to answer them.
Have a great day!!
Thanks for all your support
Peace Out